Steel Street Elbow 1/2" MPT x 1/2" FPT 3000 PSI – OEM Replacement Fitting
Part Number: 2595
Category: Pressure Washer Parts → Fittings & Adapters → Steel Elbows
Type: Steel 90° Street Elbow Fitting
The Steel Street Elbow 1/2" MPT x 1/2" FPT (Part #2595) is a heavy-duty OEM replacement fitting designed to provide a reliable 90-degree change in flow direction while allowing direct connection between male and female threaded components in pressure washer systems, pumps, hydraulic support equipment, compressed air systems, and industrial fluid transfer applications. Featuring a 1/2-inch Male Pipe Thread (MPT) connection on one end and a 1/2-inch Female Pipe Thread (FPT) connection on the other, this street elbow simplifies installations by reducing the need for additional adapters or fittings.
Key Features & Benefits
- Genuine OEM replacement fitting
- 90-degree street elbow configuration
- 1/2" MPT x 1/2" FPT connections
- Heavy-duty steel construction
- Rated up to 3000 PSI
- Leak-resistant threaded connections
- Direct male-to-female connection design
- Reduces the need for additional adapters
- Suitable for high-pressure applications
- Compact design for tight installations
- Long service life and reliable performance
Technical Specifications
Part Number: 2595
Product Type: 90° Street Elbow Fitting
Connection Size I: 1/2" MPT
Connection Size II: 1/2" FPT
Thread Type: Male Pipe Thread (MPT) x Female Pipe Thread (FPT)
Material: Steel
Maximum Pressure: 3000 PSI
Configuration: 90° Street Elbow
OEM Replacement: Yes
Application: Fluid Direction Change and Component Connection
Common Applications
- Pressure washer systems
- Pump assemblies
- Hydraulic support systems
- Compressed air systems
- Water supply systems
- Industrial fluid transfer equipment
- Chemical application equipment
- Agricultural equipment
- Wash-down systems
- Commercial cleaning equipment
- Pressure gauge and accessory installations
Performance Benefits
- Provides efficient 90-degree flow redirection
- Allows direct connection between threaded components
- Helps reduce hose and plumbing stress
- Supports high-pressure system operation
- Durable steel construction for demanding environments
- Leak-resistant threaded connections
- Simplifies system routing and installation
- Reliable long-term performance
Signs Replacement May Be Needed
Replace the fitting if you notice:
- Fluid or air leaks
- Damaged or stripped threads
- Visible corrosion or rust
- Cracks or deformation in the fitting body
- Restricted flow due to internal damage
- Loose or unreliable connections
- Excessive wear from long-term service
Installation Notes
- Shut off system pressure before servicing.
- Inspect all mating threads for wear or damage.
- Apply appropriate thread sealant or PTFE thread tape.
- Thread the male end into the receiving port.
- Connect the mating component to the female port.
- Tighten securely using the appropriate tools.
- Pressurize the system and inspect for leaks.
Important: Verify compatibility with your system's thread sizes and operating pressure requirements before installation. Always ensure the fitting's pressure rating meets or exceeds system operating pressure.
Maintenance Recommendations
- Inspect fittings regularly for leaks.
- Check threaded connections during routine maintenance.
- Replace damaged or worn fittings promptly.
- Keep threads clean and free from debris.
- Verify proper sealing after servicing.
- Monitor fitting integrity during operation.
