Pressure-Pro Hydro Vacuum Recovery System – 25.0 GPM, 425 CFM, 14″ Hg, 190″ Lift, Honda GX630 Electric Start

Part Number: RGV40H12
Category: Water Recovery & Vacuum Systems
Type: Gas-Powered Hydro Vacuum Recovery System – 25.0 GPM, 425 CFM, Honda GX630, Pump-Out System

The Pressure-Pro RGV40H12 Hydro Vacuum Recovery System is a high-capacity, engine-powered wash water recovery and pump-out solution designed for professional contractors who need efficient water collection and disposal. Capable of recovering up to 25.0 GPM with 425 CFM of airflow, 14″ Hg vacuum, and 190″ of water lift, this system is powered by a Honda GX630 electric-start gas engine for reliable, self-contained operation. Ideal for facility maintenance, environmental compliance, and restoration work, the RGV40H12 allows operators to recover wash water without interruption or manual dumping.

Featuring dual lightweight polyethylene separation tanks, this system enables continuous vacuuming and automatic pump-out to a bulk tank, landscape area, or sanitary sewer where permitted. Designed for use with cold or hot water up to 200°F, the RGV40H12 provides a rugged, corrosion-resistant solution for demanding recovery applications.

Performance Specifications

• Maximum Recovery Rate: 25.0 GPM

• Airflow: 425 CFM

• Vacuum: 14″ Hg

• Water Lift: 190″

• Engine: Honda GX630 Gas Engine

• Starting System: Electric Start

• Fuel Tank Capacity: 8 Gallons

• System Type: Engine-Powered Hydro Vacuum with Pump-Out

Key Features

• Simultaneous vacuum recovery and automatic pump-out with no loss of suction

• 12-volt transfer pumps – no external power required

• Supports one or two pickup devices

• Recovers up to 25 GPM using up to 350′ total hose length

• Adjustable air throttling system for precise suction control

• Two (2) 26-gallon lightweight polyethylene hexagonal separation tanks

• Non-corrosive tanks weigh significantly less than steel drums

• 1.5″ sludge/solids drain valve for easy purging

• Removable stainless steel tank lids for quick inspection and maintenance

• Automatic high-water shutdown and transfer pump control

• Integrated debris filters to protect pumps and blower motor

• Compact footprint with integrated 8-gallon fuel tank

Hose Requirements (Sold Separately)

• Vacuum Hose: 2″ diameter, up to 350′ maximum length

• Discharge Hose: 2″ diameter, up to 100′ maximum length

⚠️ NOTE: Vacuum and discharge hoses are NOT included.

Applications

• Wash water recovery for pressure washing operations

• Environmental compliance and runoff control

• Facility maintenance cleaning

• Fire and flood water recovery

• Food-service and restoration cleanup

• Industrial and commercial water extraction

Important Notes

• Vacuum and discharge hoses sold separately

• Designed for use with cold water or hot water up to 200°F

• All units are factory assembled, tested in the USA, and delivered ready to operate

• Disposal must comply with local environmental regulations