Oregon 72EXL072G PowerCut Saw Chain – 3/8" Pitch, .050" Gauge, 72 Drive Links, Replacement Chainsaw Cutting Chain

Part Number: 72EXL072G
Category: Lawn & Garden Cutting Blades
Type: Replacement PowerCut Chainsaw Cutting Chain

The Oregon 72EXL072G PowerCut Saw Chain is a replacement chainsaw cutting component designed for compatible chainsaws requiring a 3/8-inch pitch, .050-inch gauge, and 72 drive links. Part of Oregon's PowerCut series, this saw chain is engineered for demanding woodcutting applications, helping deliver efficient cutting performance and dependable operation when properly installed and maintained.

Product Specifications

• Part Number: 72EXL072G

• Brand: Oregon

• Product Series: PowerCut

• Chain Model: 72EXL

• Product Type: Replacement Chainsaw Saw Chain

• Component Type: Chainsaw Cutting Chain

• Chain Pitch: 3/8"

• Chain Gauge: .050" (1.3 mm)

• Drive Link Count: 72

• Cutter Configuration: Full-Chisel

• Chain Configuration: Standard Professional Cutting Chain

• Application: Chainsaw Woodcutting

• Function: Cutting Wood and Timber

• System: Chainsaw Guide Bar, Sprocket, and Cutting Chain Assembly

• Equipment Compatibility: Select Chainsaws and Guide Bars Requiring 3/8" Pitch, .050" Gauge, and 72 Drive Links

• Condition: New

Features & Benefits

• Oregon 72EXL072G PowerCut replacement saw chain

• Part of the Oregon PowerCut professional cutting chain series

• Features a 3/8-inch chain pitch

• Features a .050-inch (1.3 mm) drive link gauge

• Includes 72 drive links

• Full-chisel cutter design supports aggressive cutting performance

• Designed for demanding woodcutting applications

• Supports efficient cutting in clean wood when properly sharpened

• Provides a replacement for worn, damaged, stretched, or excessively sharpened chains

• Helps maintain the chainsaw's intended cutting performance

• Designed for use with appropriately matched guide bars and drive sprockets

• Supports consistent cutting when properly tensioned and lubricated

• Suitable for professional forestry and tree maintenance applications where compatible

• Helps maintain dependable chainsaw operation during routine cutting tasks

• Practical replacement component for chainsaw cutting system maintenance

• Supports continued chainsaw serviceability without replacing the complete guide bar assembly

Applications

• Compatible gasoline-powered chainsaws

• Professional chainsaw cutting chain replacement

• Forestry and timber cutting

• Tree removal operations

• Firewood cutting and processing

• Log cutting and bucking

• Tree maintenance and arborist operations where appropriate

• Professional landscaping equipment servicing

• Replacement of worn or damaged saw chains

• Chainsaw guide bar and chain maintenance

• Routine chainsaw cutting system servicing

• Woodcutting equipment maintenance

• Preventive chainsaw chain inspection

• Restoration of compatible chainsaw cutting assemblies

• Chainsaws requiring 3/8" pitch, .050" gauge, and 72 drive links

Important Notes

• Verify Oregon part number 72EXL072G before ordering

• This listing is for a replacement chainsaw cutting chain, not a complete chainsaw or guide bar assembly

• Confirm compatibility with your specific chainsaw model and guide bar configuration

• Verify the required 3/8-inch chain pitch

• Confirm the required .050-inch (1.3 mm) chain gauge

• Verify that your guide bar requires exactly 72 drive links

• All three specifications—pitch, gauge, and drive link count—must match the chainsaw's cutting system

• Do not assume compatibility based solely on the guide bar's advertised length

• Guide bars with the same nominal length may require different drive link counts

• Confirm the specifications stamped on the guide bar or listed in the equipment manufacturer's documentation

• Verify compatibility with the existing drive sprocket and guide bar nose sprocket

• Do not install a chain with an incorrect pitch or gauge

• Confirm the chain's full-chisel cutter configuration is appropriate for your intended application

• Full-chisel chains are generally best suited for experienced operators and clean woodcutting conditions

• Full-chisel cutters may dull more quickly when exposed to dirt, sand, or abrasive material

• This chain is not intended for cutting metal, masonry, concrete, or other non-wood materials

• Do not assume the chain is suitable for every chainsaw power rating or operating configuration

• Verify whether the chainsaw manufacturer specifies additional chain safety requirements

• Follow the chainsaw and guide bar manufacturers' installation and maintenance instructions

• Shut off the engine or motor and disconnect the applicable power source before servicing

• Remove the battery from cordless equipment or disconnect the spark plug when instructed by the manufacturer

• Allow all moving components to stop completely before handling the cutting chain

• Wear appropriate cut-resistant gloves and protective equipment when handling saw chains

• Chainsaw cutters are sharp and can cause serious injury even when the chain is stationary

• Inspect the guide bar for wear, damage, or excessive groove widening before installing a new chain

• Inspect the drive sprocket for excessive wear or damage

• Do not install a new chain on a severely worn or incompatible sprocket

• Ensure the chain is installed in the correct cutting direction

• Verify that the drive links are properly seated in the guide bar groove

• Adjust chain tension according to the chainsaw manufacturer's instructions

• Avoid operating with a chain that is excessively loose or overtightened

• New chains may require additional tension checks during the initial operating period

• Ensure the chain lubrication system is functioning correctly before operation

• Use the manufacturer-recommended bar and chain lubricant

• Never operate a chainsaw without adequate chain lubrication

• Inspect the chain regularly for cracked cutters, damaged drive links, loose rivets, or other defects

• Replace damaged or excessively worn chains immediately

• Follow Oregon's recommended sharpening angles, file size, and depth gauge settings for the 72EXL chain

• Improper sharpening or depth gauge adjustment can increase kickback risk and reduce cutting performance

• Maintain proper cutter sharpness and consistent cutting geometry

• Never modify the chain's safety-related features or cutting configuration

• Chainsaw operation presents serious cutting and kickback hazards

• Use appropriate personal protective equipment, including eye, hearing, head, hand, and leg protection as required

• Operate the chainsaw only with the required safety devices and guards in working condition

• Follow safe chainsaw handling and cutting practices at all times

• Confirm current specifications, equipment compatibility, and included quantity before ordering