Mi-T-M AW-5090-0012 Power Cord – Genuine OEM NEMA L6-20P to IEC 320-C19 Power Cord

Part Number: AW-5090-0012
Category: Portable Power Equipment → Electrical Accessories → Power Cords
Type: Mi-T-M AW-5090-0012 Power Cord – Genuine OEM NEMA L6-20P to IEC 320-C19 Power Cord

The Mi-T-M AW-5090-0012 Power Cord is a genuine OEM electrical accessory designed for select compatible Mi-T-M equipment and portable-power systems. It features a NEMA L6-20P twist-lock plug on one end and an IEC 320-C19 connector on the other, providing the designated electrical connection between compatible power sources and equipment.

Key Features & Benefits

• Part Number: AW-5090-0012
• Genuine OEM Mi-T-M electrical accessory
• Replacement equipment power cord
• NEMA L6-20P twist-lock plug
• IEC 320-C19 equipment connector
• Twist-lock design helps maintain secure plug engagement
• Provides a direct connection between compatible equipment
• Supports the manufacturer-specified electrical configuration
• Replaces a cut, damaged, overheated, or missing cord
• Suitable for select portable-power and equipment applications
• Manufactured to original equipment specifications
• Intended for use only with electrically compatible devices

Technical Specifications

• Part Number: AW-5090-0012
• Manufacturer: Mi-T-M
• Product Type: Power Cord
• Component Type: Equipment Power Cable
• Input Connector: NEMA L6-20P Male Twist-Lock Plug
• Equipment Connector: IEC 320-C19 Female Connector
• Connection Type: L6-20P to C19
• Application: Compatible Mi-T-M electrical equipment
• Function: Transmitting electrical power between compatible connections
• OEM Component: Yes
• Quantity: One Power Cord
• Cord Length: Verify current manufacturer specifications
• Wire Gauge and Conductor Count: Verify current manufacturer specifications
• Electrical Rating: Verify the equipment label and Mi-T-M documentation

Connector Configuration

NEMA L6-20P Plug

The NEMA L6-20P end is designed to:

• Connect to a compatible NEMA L6-20R receptacle
• Provide twist-lock engagement
• Help prevent unintended disconnection
• Support the designated grounded electrical circuit
• Maintain secure contact during approved equipment operation

IEC 320-C19 Connector

The IEC 320-C19 end is designed to:

• Connect to a compatible IEC C20 appliance inlet
• Provide a detachable equipment-side power connection
• Support the manufacturer-specified electrical arrangement
• Allow removal for equipment transportation, storage, or service
• Replace a damaged or missing compatible power cord

Connector shape alone does not establish complete compatibility. Voltage, amperage, frequency, phase, polarity, grounding, cord construction, and connected-equipment requirements must also match.

Compatible Applications

The Mi-T-M AW-5090-0012 Power Cord is designed for select:

• Mi-T-M portable-power equipment
• Compatible Mi-T-M ePowerStation systems
• Electrical equipment with an IEC C20 inlet
• Power sources equipped with a compatible L6-20R receptacle
• Commercial and industrial power applications
• Mobile and temporary equipment installations
• Equipment requiring OEM power cord AW-5090-0012

Compatibility is equipment-specific. Always verify the complete Mi-T-M model, serial number, input requirements, output configuration, receptacle type, equipment inlet, voltage, amperage, phase, frequency, grounding arrangement, cord length, and original part number before ordering.

Function of the Power Cord

The AW-5090-0012 Power Cord is designed to:

• Transfer electrical power between compatible connections
• Connect an L6-20R power source to equipment using a C20 inlet
• Maintain the manufacturer-specified electrical interface
• Provide secure twist-lock engagement at the power-source end
• Provide a detachable IEC connection at the equipment end
• Support dependable operation of approved equipment
• Replace a damaged, worn, or missing OEM cord
• Preserve proper grounding when used with compatible equipment

The cord does not convert voltage, frequency, phase, or amperage. The electrical characteristics of the power source must match the requirements of the connected equipment.

Typical Applications

When confirmed compatible, the AW-5090-0012 may be used with approved:

• Portable battery power systems
• Power-distribution equipment
• Commercial electrical equipment
• Industrial equipment
• Mobile service equipment
• Temporary jobsite power systems
• Compatible chargers or power modules
• Equipment with an IEC C20 power inlet

Do not use this cord as a general-purpose adapter without confirming the complete electrical requirements of both connected devices.

Common Signs Replacement May Be Needed

Inspect or replace the power cord if you notice:

• Cuts, cracks, abrasions, or exposed conductors
• Damaged or missing ground connection
• Bent, burned, loose, or corroded plug blades
• IEC connector does not seat securely
• Twist-lock plug does not insert or lock correctly
• Cord or connectors become unusually hot
• Burn marks, melting, or discoloration
• Intermittent power when the cord is moved
• Strain relief is cracked, separated, or pulling away
• Cord has been crushed, pinched, stretched, or chemically damaged
• Electrical testing identifies damaged insulation or continuity problems

Intermittent operation may also result from a damaged receptacle, worn equipment inlet, overloaded circuit, internal wiring fault, or defective connected equipment. Inspect the complete electrical system before determining the repair required.

Connection & Use Notes

• Shut down and de-energize the equipment before connecting the cord.
• Verify that the power source matches the connected equipment’s requirements.
• Inspect both ends of the cord before every use.
• Confirm that the NEMA L6-20P plug matches the available receptacle.
• Confirm that the C19 connector matches the equipment’s C20 inlet.
• Insert the L6-20P plug fully and rotate it until securely locked.
• Push the C19 connector fully into the equipment inlet.
• Route the cord away from sharp edges, hot surfaces, water, and moving components.
• Protect the cord from vehicles, doors, and heavy equipment.
• Restore power only after both connections are secure.
• De-energize the circuit before disconnecting the cord.
• Grasp the connector body rather than pulling on the cable.

Important: The AW-5090-0012 is a connection cord, not a voltage converter. Never use it to connect equipment to an incompatible power source merely because the connectors fit.

Electrical Safety Recommendations

• Confirm voltage, amperage, phase, frequency, and grounding compatibility.
• Never exceed the rating of the cord, connectors, receptacle, or connected equipment.
• Do not use the cord with an improvised adapter.
• Do not remove, bend, file, or modify connector blades.
• Do not defeat the twist-lock or grounding functions.
• Never handle electrical connections with wet hands.
• Keep the cord away from standing water and unsuitable conditions.
• Do not operate equipment with a damaged cord or loose connection.
• Fully uncoil the cord during high-load operation when required.
• Stop using the cord if it becomes unusually warm.
• Disconnect it before inspection, cleaning, or service.
• Have damaged electrical equipment inspected by qualified personnel.