Mi-T-M 16-0418 Pressure Washer Wand with Chrome Handle – Genuine OEM Replacement 36" Spray Lance
Part Number: 16-0418
Category: Pressure Washer Parts & Accessories → Spray Components → Spray Wands & Lances
Type: Mi-T-M 16-0418 Pressure Washer Wand with Chrome Handle – Genuine OEM Replacement 36" Spray Lance
The Mi-T-M 16-0418 Pressure Washer Wand is a genuine OEM replacement spray lance designed for compatible Mi-T-M pressure washers and trigger-gun assemblies. Featuring a 36-inch length and chrome handle, this wand directs pressurized water from the trigger gun toward the installed spray nozzle while providing practical reach and control. Manufactured to original equipment specifications, it helps restore dependable water delivery and pressure-washing performance.
Key Features & Benefits
- Part Number: 16-0418
- Genuine OEM Mi-T-M replacement part
- Replacement pressure washer wand and spray lance
- 36-inch length
- Equipped with a chrome handle
- Provides practical reach and spray control
- Directs pressurized water toward the spray nozzle
- Designed for compatible Mi-T-M trigger-gun assemblies
- Helps restore proper pressure-washer operation
- Replaces a bent, cracked, corroded, or leaking wand
- Suitable for professional cleaning applications
- Manufactured to original equipment specifications
Technical Specifications
- Part Number: 16-0418
- Manufacturer: Mi-T-M
- Product Type: Pressure Washer Wand
- Component Type: Spray Lance
- Lance Length: 36 Inches
- Handle Type: Chrome Handle
- Application: High-pressure water delivery
- Installation Location: Between the trigger gun and spray nozzle
- OEM Part: Yes
- Quantity: Sold Individually
Compatible Applications
The Mi-T-M 16-0418 Pressure Washer Wand is designed for select:
- Mi-T-M pressure washers
- Compatible Mi-T-M trigger guns
- Pressure washer gun-and-wand assemblies
- Compatible high-pressure spray nozzles
- Commercial and industrial pressure-washing systems
- Equipment requiring OEM wand 16-0418
Always verify the pressure-washer model, serial number, trigger-gun connection, nozzle connection, thread or fitting sizes, operating pressure, flow rate, temperature rating, parts diagram, and original part number before ordering.
Function of the Pressure Washer Wand
The 16-0418 Pressure Washer Wand is designed to:
- Carry pressurized water from the trigger gun
- Direct water toward the installed spray nozzle
- Provide 36 inches of reach during cleaning
- Improve control and positioning of the spray
- Help maintain distance between the operator and cleaning surface
- Support accurate pressure-washing applications
- Restore proper spray-lance functionality
- Replace a worn, leaking, bent, or damaged wand
A correctly matched wand is essential for secure connections, controlled spray direction, and safe pressure-washer operation.
Common Signs Replacement Is Needed
Replace the pressure washer wand if you notice:
- Water leaking from the wand body or fittings
- Bent, cracked, or visibly damaged lance
- Corrosion or deterioration
- Damaged inlet or nozzle connection
- Spray nozzle no longer locks or threads securely
- Excessive movement between the wand and trigger gun
- Restricted or inconsistent water flow
- Damage caused by impact, freezing, heat, or chemicals
- Wand cannot safely support the operating pressure
- Chrome handle is loose, damaged, or heavily worn
Spray problems may also result from a clogged nozzle, damaged trigger gun, restricted hose, worn pump, or improper water supply. Inspect the complete pressure-washer system before assuming the wand is the only cause.
Installation & Service Notes
- Shut down the pressure washer and turn off the water supply.
- Disconnect the power source or spark-plug wire when applicable.
- Squeeze the trigger gun to release trapped system pressure.
- Allow the engine, pump, hose, and hot components to cool.
- Remove the existing wand according to the manufacturer’s instructions.
- Inspect the trigger-gun outlet, couplers, threads, seals, and O-rings.
- Confirm that the replacement wand matches all required connections and ratings.
- Install the Mi-T-M 16-0418 wand securely onto the compatible trigger gun.
- Attach the correctly sized and rated spray nozzle.
- Confirm that all connections are fully engaged and properly sealed.
- Turn on the water supply and inspect each connection for leakage.
- Point the wand in a safe direction before starting the pressure washer.
- Test the assembly at low pressure when possible.
Important: The wand, trigger gun, nozzle, fittings, and hose must meet or exceed the pressure washer’s operating pressure, flow rate, and temperature requirements. Never install, disconnect, or service the wand while the system is operating or pressurized.
Safety Recommendations
- Never point the wand at people, animals, electrical equipment, or fragile surfaces.
- Keep hands and other body parts away from the high-pressure spray.
- Wear eye protection, gloves, closed-toe footwear, and suitable protective clothing.
- Maintain stable footing and hold the trigger gun securely.
- Expect reaction force when the trigger is pulled.
- Never check for leaks using your fingers or skin.
- Do not use a bent, cracked, corroded, or leaking wand.
- Do not use the wand as a lever, pry bar, or support.
- Keep bystanders away from the cleaning area.
- Seek immediate medical care for any high-pressure injection injury.
Maintenance Recommendations
- Inspect the wand and fittings before each use.
- Check for cracks, bends, corrosion, leaks, and loose connections.
- Keep the internal passage and nozzle connection free of debris.
- Replace damaged O-rings and seals with approved components.
- Flush the wand with clean water after chemical application.
- Release trapped pressure before storage or service.
- Drain all water before freezing conditions.
- Store the wand in a clean, dry, and protected location.
- Avoid dropping or striking the wand against hard surfaces.
- Use genuine OEM replacement parts to maintain proper fit, pressure compatibility, and dependable pressure-washer operation.
