Hydra-Flex RIPSAW™ Rotating Turbo Nozzle – HD 10.0 Orifice, 3200 PSI Pressure Washer Nozzle
Part Number: 7187
Category: Pressure Washer Parts & Accessories → Pressure Washer Nozzles → Turbo Nozzles
Type: Hydra-Flex RIPSAW™ Rotating Turbo Nozzle – HD 10.0 Orifice, 3,200 PSI Pressure Washer Nozzle
The Hydra-Flex RIPSAW™ Rotating Turbo Nozzle (Part #7187) is a premium heavy-duty rotating pressure washer nozzle engineered for demanding commercial, industrial, and hydro-excavation cleaning applications. Featuring an HD 10.0 orifice, 1/2" FPT inlet, and an operating pressure range of 1,000–3,200 PSI, this turbo nozzle combines the concentrated cleaning force of a zero-degree spray with a high-speed rotating action to deliver exceptional cleaning performance while covering more surface area.
Key Features & Benefits
- Part Number: 7187
- Genuine Hydra-Flex RIPSAW™ Rotating Turbo Nozzle
- HD 10.0 orifice
- 1/2" FPT inlet
- Operating pressure range: 1,000–3,200 PSI
- Maximum operating temperature: 180°F
- Heavy-duty urethane protective coating
- Stainless steel housing
- Tungsten carbide nozzle tip for extended wear resistance
- High-speed rotating spray pattern for aggressive cleaning
- Non-conductive urethane cover
- Ideal for commercial, industrial, and hydro-excavation applications
Technical Specifications
Part Number: 7187
Manufacturer: Hydra-Flex
Product Line: RIPSAW™
Product Type: Rotating Turbo Nozzle
Orifice Size: 10.0 HD
Inlet Connection: 1/2" FPT
Operating Pressure: 1,000–3,200 PSI
Maximum Temperature: 180°F
Housing Material: Stainless Steel
Protective Cover: Heavy-Duty Urethane (Non-Conductive)
Nozzle Tip Material: Tungsten Carbide
Compatible Applications
Ideal for cleaning:
- Concrete and masonry
- Sidewalks and parking lots
- Construction equipment
- Heavy machinery
- Agricultural equipment
- Industrial facilities
- Fleet vehicles
- Hydro-excavation equipment
- Municipal maintenance equipment
- Commercial pressure washing applications
Function of the RIPSAW™ Turbo Nozzle
The Hydra-Flex RIPSAW™ HD 10.0 Turbo Nozzle generates a rapidly spinning high-pressure water jet that combines concentrated impact with a rotating spray pattern. This design helps to:
- Remove stubborn dirt, grease, mud, and heavy buildup
- Increase cleaning efficiency on durable surfaces
- Cover larger areas more quickly
- Reduce operator fatigue during extended use
- Deliver consistent, high-impact cleaning performance
- Protect the nozzle from impacts with its heavy-duty urethane coating
Common Signs Replacement Is Needed
Replace the turbo nozzle if you notice:
- Reduced cleaning performance
- Uneven or distorted spray pattern
- Nozzle no longer rotates properly
- Excessive vibration or internal noise
- Water leaking from the nozzle body
- Damaged urethane protective cover
- Worn tungsten carbide nozzle tip
- Damaged inlet threads or housing
Replacing a worn turbo nozzle restores maximum cleaning efficiency and reliable rotating performance.
Installation & Service Notes
Turn off the pressure washer and relieve all system pressure before replacing the nozzle.
Install the Hydra-Flex RIPSAW™ Rotating Turbo Nozzle (Part #7187) onto a compatible spray lance using the 1/2" FPT inlet. Tighten securely according to the pressure washer manufacturer's specifications and verify that the nozzle rotates freely before operation.
Important: Match the HD 10.0 orifice to your pressure washer's flow rate for optimum performance. Operate only within the specified pressure range of 1,000–3,200 PSI and do not exceed the maximum operating temperature of 180°F. This turbo nozzle is intended for use on durable surfaces only and should not be used on painted finishes, vehicles, glass, soft wood, or other delicate materials that may be damaged by concentrated high-pressure spray.
Maintenance Recommendations
- Flush the nozzle thoroughly with clean water after every use.
- Inspect the tungsten carbide tip regularly for wear.
- Check the urethane protective cover for cuts or impact damage.
- Inspect the rotating mechanism for smooth operation.
- Use clean, filtered water whenever possible to maximize service life.
- Store the nozzle in a clean, dry location when not in use.
- Replace the nozzle if rotation becomes inconsistent or cleaning performance declines to maintain peak productivity and reliability.
