Husqvarna 738219800 8x22x7 608Z Ball Bearing – Replacement Lawn & Garden Equipment Bearing Component

Part Number: 738219800
Category: Lawn & Garden Equipment Replacement Parts
Type: 8x22x7 608Z Ball Bearing – Replacement Lawn & Garden Equipment Bearing Component

The Husqvarna 738219800 8x22x7 608Z Ball Bearing is a replacement bearing component designed for compatible Husqvarna lawn and garden equipment. Featuring the supplied 8 x 22 x 7 mm dimensions and 608Z bearing designation, this component is designed to support rotational movement within the applicable equipment assembly while helping maintain proper alignment and reduce friction between moving components. It is suitable for replacing a worn, noisy, rough, seized, loose, damaged, corroded, or otherwise unserviceable ball bearing when Husqvarna part number 738219800 is specified.

Product Specifications

• Part Number: 738219800
• Brand: Husqvarna
• Product Type: Ball Bearing
• Bearing Designation: 608Z
• Dimensions: 8 x 22 x 7 mm
• Inner Diameter: 8 mm
• Outer Diameter: 22 mm
• Width: 7 mm
• Component Type: Replacement Bearing Component
• Application: Lawn & Garden Equipment
• System: Rotating & Mechanical Support System
• Function: Rotational Support, Alignment & Friction Reduction
• Condition: New

Features & Benefits

• Replacement 608Z ball bearing for compatible Husqvarna equipment
• Supplied dimensions of 8 x 22 x 7 mm
• Features an 8 mm inner diameter, 22 mm outer diameter, and 7 mm width
• Designed to support smooth rotational movement within the applicable equipment assembly
• Helps reduce friction between applicable rotating and stationary components
• Helps maintain proper shaft or rotating-component alignment when correctly installed
• Supports the original mechanical configuration of the applicable equipment assembly
• Helps restore proper movement when the original bearing becomes worn, rough, noisy, loose, or seized
• Provides a part-number-specific replacement rather than relying solely on bearing dimensions or appearance
• Suitable for replacing a worn, noisy, rough, seized, loose, damaged, corroded, contaminated, or unserviceable bearing
• Useful for mechanical-system maintenance, rotating-component repair, and equipment restoration
• Direct replacement option when Husqvarna part number 738219800 is specified

Applications

• Husqvarna lawn and garden equipment
• Compatible Husqvarna outdoor power equipment
• Rotating equipment assemblies
• Shaft support applications
• Mechanical drive assemblies
• Pulley and rotating-component systems where applicable
• Bearing-supported equipment components
• Mechanical-system maintenance and repair
• Replacement of worn or damaged ball bearings
• Applications specifying Husqvarna 738219800

Important Notes

• Verify part number 738219800 before ordering
• Confirm compatibility with your specific Husqvarna equipment model and bearing application
• The supplied product information identifies this component as an 8x22x7 608Z Ball Bearing
• The supplied bearing dimensions are 8 mm inner diameter x 22 mm outer diameter x 7 mm width
• The exact equipment models and assemblies associated with this bearing are not identified in the supplied product information
• Do not assume this bearing is specifically for a wheel, pulley, spindle, shaft, transmission, gearbox, idler, engine, mower deck, or other particular assembly unless confirmed by the applicable Husqvarna parts information
• The 608Z designation should be verified against the original bearing and applicable Husqvarna parts information before ordering
• Do not assume that another 608-series bearing is automatically interchangeable based solely on nominal dimensions
• The exact bearing material, internal clearance, load rating, speed rating, lubrication specification, tolerance class, and operating temperature range are not identified
• Similar-size bearings can differ in shielding, sealing, internal clearance, precision, load capacity, lubrication, and application requirements
• Compare the original bearing's part number, bearing designation, inner diameter, outer diameter, width, shielding configuration, and installed position
• Inspect the associated shaft, housing, bore, spacers, retainers, washers, pulleys, gears, and related rotating components for wear or damage
• If the original bearing has failed, inspect the surrounding assembly for misalignment, damaged shafts, worn bearing seats, contamination, inadequate lubrication, excessive loading, or overheating
• A worn shaft or damaged bearing housing may prevent the replacement bearing from fitting or operating correctly
• Check the applicable shaft and bearing bore for scoring, corrosion, distortion, excessive wear, or other damage before installation
• Keep the replacement bearing and installation surfaces clean to prevent dirt, metal particles, or other contaminants from entering the bearing
• Use appropriate bearing installation procedures and apply force only to the correct bearing race for the installation method
• Avoid transmitting installation force through the bearing balls, as this can damage the bearing raceways and rolling elements
• Do not strike the bearing directly with a hammer or other hard tool
• Do not grind, drill, file, heat excessively, reshape, enlarge the bore, remove shielding, or otherwise modify the bearing to force compatibility
• Do not remove factory-applied lubrication or add additional lubricant unless specifically required by the applicable service information
• This listing is for the ball bearing; do not assume that shafts, spacers, retainers, washers, seals, pulleys, gears, mounting hardware, or other associated components are included unless specifically stated
• Shut off the equipment, disconnect the applicable spark plug, battery, or other power source, and allow all moving components to stop before servicing the bearing assembly
• After installation, verify proper bearing seating, shaft alignment, component retention, rotational movement, clearance, and absence of binding or excessive play
• Confirm that the applicable assembly rotates smoothly without abnormal noise, roughness, excessive vibration, overheating, or interference before returning the equipment to normal service.