Husqvarna 599656793 28" X-Tough Light Guide Bar 3/8" .050" – Replacement Chainsaw Guide Bar

Part Number: 599656793
Category: Chainsaw Replacement Parts & Cutting Accessories
Type: 28" X-Tough Light Guide Bar – 3/8" Pitch, .050" Gauge Replacement Chainsaw Guide Bar

The Husqvarna 599656793 28" X-Tough Light Guide Bar is a replacement chainsaw cutting-system component designed for compatible Husqvarna chainsaws. Featuring a 28-inch bar designation, 3/8-inch chain pitch, and .050-inch chain gauge, this X-Tough Light guide bar provides the track and support required for the saw chain to travel around the cutting assembly. Designed for applications specifying this bar configuration, the 599656793 is an ideal replacement for a worn, bent, damaged, excessively grooved, or otherwise unserviceable guide bar.

Product Specifications

• Part Number: 599656793
• Brand: Husqvarna
• Product Type: Chainsaw Guide Bar
• Series: X-Tough Light
• Guide Bar Length: 28"
• Chain Pitch: 3/8"
• Chain Gauge: .050"
• Component Type: Replacement Chainsaw Guide Bar
• Application: Chainsaws / Outdoor Power Equipment
• System: Chainsaw Bar & Chain Cutting System
• Function: Saw Chain Guidance, Support & Cutting-System Operation
• Condition: New

Features & Benefits

• Replacement 28" X-Tough Light guide bar for compatible Husqvarna chainsaws
• Features a specified 3/8" chain pitch
• Designed for chains using the specified .050" gauge
• X-Tough Light series configuration for applicable Husqvarna chainsaw applications
• Provides the guide track required for proper saw chain movement
• Supports and guides the cutting chain around the chainsaw cutting assembly
• Helps maintain proper chain positioning during operation
• Suitable for replacing a bent, worn, damaged, excessively grooved, or otherwise unserviceable guide bar
• Useful for chainsaw cutting-system maintenance and restoration
• Direct replacement option when Husqvarna part number 599656793 is specified

Applications

• Husqvarna chainsaws
• Compatible professional and heavy-duty chainsaw applications where specified
• Chainsaws requiring a 28" guide bar configuration
• 3/8" pitch chainsaw cutting systems
• .050" gauge saw chain applications
• Chainsaw bar and chain assemblies
• Forestry and wood-cutting equipment where compatible
• Chainsaw cutting-system maintenance and repair
• Replacement of worn or damaged guide bars
• Applications specifying Husqvarna 599656793

Important Notes

• Verify part number 599656793 before ordering
• Confirm compatibility with your specific Husqvarna chainsaw model and cutting-system configuration
• This guide bar is specified as 28", 3/8" pitch, and .050" gauge
• Guide bar compatibility cannot be determined by bar length alone
• The chainsaw, guide bar, drive sprocket, and saw chain must use compatible specifications
• Verify the required bar mount pattern, 3/8" chain pitch, .050" chain gauge, drive-link count, oiling configuration, and chain-tensioning interface before ordering
• The required saw chain drive-link count is not identified in the supplied product information and should be confirmed for the specific bar and chainsaw configuration
• The exact bar mount designation, overall physical dimensions, bar thickness, weight, nose configuration, sprocket-nose specifications, material construction, lubrication-hole configuration, and compatible chainsaw models are not identified in the supplied product information
• The 28" designation represents the specified guide bar size/application and should not necessarily be interpreted as an exact end-to-end physical measurement
• Do not substitute a guide bar based solely on approximate length, appearance, chain pitch, or gauge
• Inspect the existing guide bar for rail wear, uneven rails, burrs, excessive groove wear, cracking, bending, damaged mounting slots, blocked oil passages, or nose damage
• Inspect associated saw chains, drive sprockets, clutch drums, chain tensioners, bar studs, bar nuts, chain catchers, oil passages, and lubrication-system components for wear or damage
• A worn drive sprocket or damaged chain can accelerate wear on a replacement guide bar
• Make sure the guide bar's oil passages and chain groove are clean during installation and routine maintenance
• Use only a saw chain with the correct pitch, gauge, drive-link count, and configuration for the installed guide bar and chainsaw
• Maintain proper chain tension according to the chainsaw manufacturer's instructions; a chain that is excessively loose or tight can contribute to premature wear or unsafe operation
• Maintain proper bar and chain lubrication during operation
• Guide bar rails should be inspected regularly for uneven wear, burrs, damage, and adequate groove depth
• This listing is for the 28" X-Tough Light guide bar; do not assume that a saw chain, drive sprocket, clutch components, bar nuts, mounting hardware, chain oil, or other cutting-system components are included unless specifically stated
• Shut off the chainsaw, engage the chain brake as appropriate, disconnect the spark plug or power source when servicing, and make sure the chain and cutting system have completely stopped
• Wear appropriate cut-resistant gloves and eye protection when handling or servicing chainsaw bars and chains
• After installation, verify proper bar fitment, mounting security, chain compatibility, chain tension, chain movement, lubrication, alignment, and overall cutting-system operation before returning the chainsaw to normal service