Husqvarna 588078303 Upper Steering Arm – Replacement Lawn & Garden Equipment Steering System Component

Part Number: 588078303
Category: Lawn & Garden Equipment Replacement Parts
Type: Upper Steering Arm – Replacement Lawn & Garden Equipment Steering System Component

The Husqvarna 588078303 Upper Steering Arm is a replacement steering system component designed for compatible Husqvarna lawn and garden equipment. Installed in the upper portion of the applicable steering assembly, this arm helps transfer steering input and maintain the required connection, positioning, and movement between associated steering components. It is suitable for replacing a bent, worn, cracked, loose, damaged, distorted, or otherwise unserviceable steering arm when Husqvarna part number 588078303 is specified.

Product Specifications

• Part Number: 588078303
• Brand: Husqvarna
• Product Type: Upper Steering Arm
• Position: Upper
• Component Type: Replacement Steering System Component
• Application: Lawn & Garden Equipment
• System: Steering & Directional Control System
• Function: Steering Input Transfer, Linkage & Component Positioning
• Condition: New

Features & Benefits

• Replacement upper steering arm for compatible Husqvarna equipment
• Designed for the specified upper position within the applicable steering system
• Helps transfer mechanical steering movement through the associated steering assembly
• Provides a connection point between applicable steering components
• Helps maintain proper steering linkage positioning and alignment
• Supports responsive directional control when the steering system is correctly assembled and adjusted
• Helps restore the original steering configuration when the existing arm becomes worn or damaged
• Suitable for replacing a bent, cracked, worn, distorted, loose, damaged, or unserviceable steering arm
• Useful for steering-system maintenance, linkage repair, and equipment restoration
• Direct replacement option when Husqvarna part number 588078303 is specified

Applications

• Husqvarna lawn and garden equipment
• Compatible Husqvarna riding equipment where specified
• Steering assemblies
• Steering linkage systems
• Directional control systems
• Upper steering components
• Steering shaft and linkage assemblies where applicable
• Steering-system maintenance and repair
• Replacement of damaged steering arms
• Applications specifying Husqvarna 588078303

Important Notes

• Verify part number 588078303 before ordering
• Confirm compatibility with your specific Husqvarna equipment model and steering configuration
• The supplied product information identifies this component as an Upper Steering Arm
• The exact equipment models and steering-system configurations using this component are not identified in the supplied product information
• The upper designation indicates a specific position within the applicable steering assembly and should not be assumed interchangeable with a lower steering arm or other linkage component
• Do not assume this component is specifically a pitman arm, spindle arm, tie-rod arm, steering sector, steering shaft arm, drag-link arm, or wheel spindle component unless confirmed by the applicable Husqvarna parts information
• The exact length, thickness, material, finish, bore dimensions, spline configuration, mounting-hole dimensions, offset, bend geometry, and attachment method are not identified
• Do not assume the arm uses a particular splined, keyed, clamped, bolted, pinned, welded, or press-fit connection unless confirmed for the specific application
• Similar-looking steering arms can differ in length, offset, mounting geometry, travel, orientation, and steering ratio
• Compare the original component's part number, overall shape, upper-position orientation, mounting points, bore or shaft interface, linkage connections, and offset
• Inspect the associated steering shaft, bushings, bearings, tie rods, drag links, pivots, ball joints, steering gears, sector components, spindles, retainers, and mounting hardware as applicable
• If the original steering arm is bent or distorted, inspect the steering system for impact damage, seized pivots, worn bushings, loose hardware, damaged linkage, or misalignment
• Excessive steering play may result from wear elsewhere in the system and may not be corrected by replacing the steering arm alone
• Check all steering pivots and linkage connections for excessive free play, binding, corrosion, deformation, or damaged retaining hardware
• Make sure the replacement arm is installed in the correct position and orientation to maintain the intended steering geometry
• Incorrect installation or alignment can affect steering travel, wheel alignment, turning response, and component clearance
• Do not bend, hammer, grind, drill, weld, heat, enlarge mounting holes, alter splines, or otherwise modify the steering arm to force compatibility
• Use the correct mounting hardware, retainers, and manufacturer-specified tightening procedures for the applicable equipment
• This listing is for the upper steering arm; do not assume that steering shafts, tie rods, bushings, bearings, spindles, ball joints, gears, brackets, retainers, or mounting hardware are included unless specifically stated
• Shut off the equipment, remove the key, disconnect the applicable power source, and secure the machine against unintended movement before servicing the steering system
• If the equipment must be raised for steering service, support it securely using appropriate equipment rather than relying solely on a jack
• After installation, verify proper arm orientation, mounting security, linkage engagement, steering travel, wheel alignment, component clearance, absence of binding, and overall directional control before returning the equipment to normal service