Husqvarna 584465301 8" x 1.75" Rad3 White Wheel – Replacement Lawn & Garden Equipment Wheel Component

Part Number: 584465301
Category: Lawn & Garden Equipment Replacement Parts
Type: 8" x 1.75" Rad3 White Wheel – Replacement Lawn & Garden Equipment Wheel Component

The Husqvarna 584465301 8" x 1.75" Rad3 White Wheel is a replacement wheel component designed for compatible Husqvarna lawn and garden equipment. Featuring a supplied 8" x 1.75" size designation, Rad3 configuration, and white finish, this wheel helps provide equipment support, mobility, and ground contact within the applicable wheel assembly. It is suitable for replacing a worn, cracked, broken, damaged, distorted, excessively loose, or otherwise unserviceable wheel when Husqvarna part number 584465301 is specified.

Product Specifications

• Part Number: 584465301
• Brand: Husqvarna
• Product Type: Wheel
• Size Designation: 8" x 1.75"
• Configuration: Rad3
• Color: White
• Component Type: Replacement Wheel Component
• Application: Lawn & Garden Equipment
• System: Wheel & Mobility System
• Function: Equipment Support, Ground Contact & Rolling Movement
• Condition: New

Features & Benefits

• Replacement 8" x 1.75" wheel for compatible Husqvarna equipment
• Supplied Rad3 wheel configuration
• White finish matching the supplied product designation
• Designed for use within the applicable equipment wheel assembly
• Provides rolling support for equipment movement across applicable surfaces
• Helps maintain proper equipment support and mobility when correctly installed
• Supports smooth wheel rotation through the applicable axle and mounting arrangement
• Helps restore equipment mobility when the original wheel becomes worn, cracked, damaged, or distorted
• Provides a part-number-specific replacement rather than relying solely on approximate wheel diameter or appearance
• Suitable for replacing a worn, cracked, broken, distorted, damaged, excessively loose, or unserviceable wheel
• Useful for wheel-system maintenance, mobility repairs, and equipment restoration
• Direct replacement option when Husqvarna part number 584465301 is specified

Applications

• Husqvarna lawn and garden equipment
• Compatible Husqvarna outdoor power equipment
• Equipment wheel assemblies
• Lawn equipment mobility systems
• Wheel and axle assemblies
• Ground-support systems
• Equipment transportation and maneuvering systems
• Wheel-system maintenance and repair
• Replacement of worn or damaged wheels
• Applications specifying Husqvarna 584465301

Important Notes

• Verify part number 584465301 before ordering
• Confirm compatibility with your specific Husqvarna equipment model and wheel configuration
• The supplied product information identifies this component as an 8" x 1.75" Rad3 White Wheel
• The exact equipment models associated with this wheel are not identified in the supplied product information
• The supplied 8" x 1.75" designation should be verified against the original wheel and applicable Husqvarna parts information before ordering
• The exact meaning and application of the Rad3 designation should be confirmed using the applicable Husqvarna parts information
• Do not assume this component is specifically a front wheel, rear wheel, drive wheel, gauge wheel, caster wheel, deck wheel, or support wheel unless confirmed for the applicable equipment
• Do not assume this wheel is specifically for a walk-behind mower, riding mower, lawn tractor, zero-turn mower, tiller, cultivator, or other particular equipment type unless confirmed by the applicable Husqvarna parts information
• The exact overall diameter, tread width, hub width, bore diameter, axle size, offset, tread pattern, wheel material, load capacity, bearing configuration, and bushing configuration are not identified beyond the supplied product designation
• Similar-looking 8" wheels can differ in hub dimensions, axle bore, offset, tread design, mounting configuration, bearings, bushings, and equipment compatibility
• Do not select a replacement wheel solely by approximate diameter, width, color, or visual appearance
• Compare the original wheel's part number, dimensions, hub configuration, axle bore, tread design, offset, mounting method, and installed position
• Inspect the associated axle, shaft, bearings, bushings, spacers, washers, retainers, clips, hubs, brackets, and mounting hardware for wear or damage
• Excessive wheel looseness or wobble may result from a worn axle, bushing, bearing, hub, spacer, retaining component, or mounting point, rather than the wheel alone
• If the original wheel shows uneven or accelerated wear, inspect the equipment for axle damage, misalignment, worn mounting components, dragging parts, or other mechanical issues
• Check the axle and mounting surfaces for bending, scoring, corrosion, excessive wear, or distortion before installing the replacement wheel
• Ensure the replacement wheel is installed in the correct position and orientation
• Use the correct washers, spacers, bushings, bearings, clips, retainers, and fasteners specified for the applicable equipment configuration
• Apply lubricant only where specified by the applicable equipment service information
• Make sure the wheel rotates freely without excessive side-to-side movement after installation
• Do not drill, enlarge the axle bore, grind, cut, heat, reshape, modify the hub, or otherwise alter the wheel to force compatibility
• This listing is for the 8" x 1.75" Rad3 White Wheel; do not assume that axles, bearings, bushings, spacers, washers, clips, retainers, brackets, or mounting hardware are included unless specifically stated
• Shut off the equipment, remove the ignition key where applicable, and disconnect the spark plug, battery, or other power source before servicing the wheel assembly
• Properly support the equipment before removing a wheel, particularly if the wheel supports the equipment's weight
• Never work beneath equipment supported only by a jack; use appropriate support equipment for the specific application
• After installation, verify proper wheel retention, alignment, rotation, axle engagement, clearance, and mounting security
• Confirm the wheel rotates and tracks correctly without binding, wobbling, rubbing, excessive play, abnormal noise, or interference before returning the equipment to normal service.