Husqvarna 582812601 24.5 x 32.7 x 3 Radial Seal – Replacement Lawn & Garden Equipment Sealing Component

Part Number: 582812601
Category: Lawn & Garden Equipment Replacement Parts
Type: 24.5 x 32.7 x 3 Radial Seal – Replacement Lawn & Garden Equipment Sealing Component

The Husqvarna 582812601 24.5 x 32.7 x 3 Radial Seal is a replacement sealing component designed for compatible Husqvarna lawn and garden equipment. Radial seals are used around applicable rotating or cylindrical components to help maintain separation between internal and external environments, retain lubricant or other media where required, and help limit the entry of dirt and contaminants. Designed for applications specifying the 24.5 x 32.7 x 3 designation, this seal is suitable for replacing a worn, hardened, cracked, leaking, distorted, or otherwise unserviceable component.

Product Specifications

• Part Number: 582812601
• Brand: Husqvarna
• Product Type: Radial Seal
• Size / Designation: 24.5 x 32.7 x 3
• Component Type: Replacement Sealing Component
• Application: Lawn & Garden Equipment
• System: Mechanical Sealing & Rotating Component System
• Function: Sealing, Contaminant Protection & Fluid Retention Where Applicable
• Condition: New

Features & Benefits

• Replacement radial seal for compatible Husqvarna equipment
• Features the supplied 24.5 x 32.7 x 3 size designation
• Designed for use around the applicable rotating or cylindrical component
• Helps maintain separation between internal components and the surrounding environment
• May help retain lubricant or other media within the applicable assembly
• Helps reduce the entry of dirt, dust, moisture, debris, and other contaminants where required by the original design
• Supports proper operation of shafts, housings, bearings, or other associated components where applicable
• Suitable for replacing a worn, hardened, cracked, torn, leaking, distorted, damaged, or unserviceable seal
• Useful during equipment repair, preventive maintenance, and mechanical assembly service
• Direct replacement option when Husqvarna part number 582812601 is specified

Applications

• Husqvarna lawn and garden equipment
• Compatible Husqvarna outdoor power equipment
• Rotating shaft assemblies
• Mechanical sealing systems
• Bearing and housing assemblies where applicable
• Lubricated mechanical assemblies where applicable
• Drivetrain or engine assemblies where specified
• Equipment maintenance and sealing-system repair
• Replacement of worn or leaking radial seals
• Applications specifying Husqvarna 582812601

Important Notes

• Verify part number 582812601 before ordering
• Confirm compatibility with your specific Husqvarna equipment model and mechanical assembly
• The supplied product information identifies this component as a Radial Seal with a 24.5 x 32.7 x 3 designation
• The exact interpretation and measurement units of the 24.5 x 32.7 x 3 dimensions are not identified in the supplied product information
• Do not automatically assume these values represent inside diameter x outside diameter x width/thickness in millimeters unless confirmed by the applicable Husqvarna technical information
• The exact seal material, lip configuration, sealing direction, spring configuration, pressure rating, temperature range, rotational-speed rating, chemical compatibility, and lubrication requirements are not identified in the supplied product information
• The exact equipment system in which this radial seal is installed is not identified; do not assume it is specifically an engine crankshaft seal, transmission seal, transaxle seal, axle seal, gearbox seal, bearing seal, pump seal, or another particular application
• Compare the original seal's part number, dimensions, profile, lip configuration, installation depth, orientation, shaft interface, and housing fit
• Radial seals that appear visually similar may differ in material, sealing-lip design, dimensions, directionality, operating limits, and intended application
• Inspect the associated shaft, journal, bearing, bushing, housing bore, sealing surface, and surrounding components before installing the replacement
• A damaged, grooved, corroded, rough, bent, or excessively worn shaft surface can cause a new radial seal to leak or fail prematurely
• Check for excessive shaft play, bearing wear, misalignment, overheating, contamination, or abnormal movement that may have contributed to the original seal failure
• Clean the seal bore and mating surfaces before installation and prevent dirt, metal particles, old seal material, or other debris from entering the assembly
• Avoid damaging the sealing lip during installation; sharp shaft edges, splines, threads, or improper installation tools can cut or deform the seal
• Install the seal to the correct depth and orientation specified for the applicable assembly
• Do not assume the seal should be installed with a particular lip direction without confirming the original configuration or applicable service procedure
• Use only the appropriate lubricant or installation aid when specified for the application; incompatible substances may damage some sealing materials
• Do not cut, stretch, grind, sand, heat, reshape, trim, glue, or otherwise modify the radial seal to force compatibility
• This listing is for the radial seal; do not assume that bearings, bushings, shafts, spacers, retaining rings, gaskets, O-rings, lubricant, installation tools, or other associated components are included unless specifically stated
• Shut off the equipment, disconnect the applicable power source, and safely relieve or drain any applicable fluid or pressure before servicing the sealed assembly
• After installation, verify proper seal seating, orientation, shaft movement, component clearance, lubricant or fluid level where applicable, and absence of leakage before returning the equipment to normal service