Husqvarna 532008134 16x6.5/7.5-8 Inner Tube – Genuine OEM Replacement Tire Tube

Part Number: 532008134
Category: Lawn Tractor Tires, Wheels & Inner Tubes
Type: 16x6.5/7.5-8 Inner Tube – Genuine OEM Replacement Tire Tube

The Husqvarna 532008134 16x6.5/7.5-8 Inner Tube is a genuine OEM replacement tire tube designed for select Husqvarna lawn tractors, riding mowers, garden tractors, and compatible outdoor power equipment using the specified tire and wheel configuration.

Product Specifications

• Part Number: 532008134
• Manufacturer: Husqvarna
• Product Type: Tire Inner Tube
• OEM Description: Tube
• Tube Size: 16x6.5/7.5-8
• Nominal Tire Diameter: 16"
• Compatible Tire Width Range: 6.5" / 7.5" – Application Dependent
• Rim Diameter: 8"
• Component Type: Tire / Wheel Component
• Function: Provides the Inflatable Air Chamber Within a Compatible Tire
• System: Wheel / Tire Assembly
• Application: Lawn Tractor / Riding Mower / Garden Tractor
• Compatible Brand: Husqvarna
• Additional Applications: Select Craftsman / AYP / Poulan Equipment
• Installation Location: Model & Wheel Configuration Dependent
• Replacement Type: Direct OEM Replacement
• OEM Status: Genuine Husqvarna OEM Part
• Condition: New
• Quantity: 1 Inner Tube
• Part Number Reference: 532008134
• Alternate Number Format: 532 00 81-34
• Common Cross-Reference: 8134H

Features & Benefits

• Genuine Husqvarna OEM replacement tire tube
• Factory-specified 16x6.5/7.5-8 sizing
• Designed for compatible lawn tractor and riding mower tires
• Fits applicable 8-inch wheel/rim configurations
• Provides the internal air chamber for pneumatic tires
• Helps restore proper tire inflation
• Suitable for replacing punctured or leaking inner tubes
• Helps extend the serviceability of an otherwise usable tire
• Designed to fit properly inside compatible tire sizes
• Supports consistent tire pressure when correctly installed
• Useful for lawn tractor wheel and tire repairs
• Suitable for routine mower maintenance
• Helps restore equipment mobility following tube failure
• Manufactured for applicable OEM wheel configurations
• Direct replacement for equipment requiring 532008134
• Genuine OEM replacement rather than an unspecified universal tube

Applications

The Husqvarna 532008134 Inner Tube is intended for compatible Husqvarna-family riding equipment using the specified tire and wheel configuration.

Applications may include select:

• Husqvarna lawn tractors
• Husqvarna garden tractors
• Husqvarna riding lawn mowers
• Craftsman lawn tractors
• AYP-manufactured riding equipment
• Poulan riding mowers
• Front or rear pneumatic wheel assemblies depending on model
• 16-inch mower tire applications
• Tires using compatible 8-inch rims
• Wheel and tire repair
• OEM applications specifying 532008134
• Applications cross-referencing 8134H

Always confirm the complete mower model and tire size before ordering, as wheel and tire specifications can vary even among closely related tractor models.

Tire Size Information

The 16x6.5/7.5-8 designation provides important sizing information for determining compatibility.

Generally:

• 16 – Nominal overall tire diameter
• 6.5 / 7.5 – Applicable tire-width range or associated sizing
• 8 – Nominal rim diameter

The tube must be appropriately sized for both the tire and wheel assembly. Using an incorrectly sized tube can cause folding, stretching, pinching, premature wear, or valve-stem problems.

For best results, compare the tire size molded into the sidewall of your existing tire with the applicable OEM parts documentation.

Common Reasons for Inner Tube Replacement

Replacement of the 532008134 Inner Tube may be necessary when the existing tube has:

• Nail or screw punctures
• Small holes or leaks
• Split seams
• Cracking from age
• Dry-rotted rubber
• Valve-stem leakage
• Torn valve stem
• Pinch damage
• Damage caused during tire installation
• Repeated loss of air pressure
• Deterioration from extended service
• Damage caused by operating with insufficient tire pressure

Before installing a new tube, inspect the tire and wheel to determine what caused the original tube to fail.

Wheel & Tire Inspection

When replacing the inner tube, inspect the complete wheel assembly, including:

• Tire tread
• Tire sidewalls
• Inside surface of the tire
• Wheel rim
• Valve-stem opening
• Bead seating surfaces
• Wheel bearings or bushings
• Axle hardware
• Washers and retaining clips

Carefully check the inside of the tire for nails, screws, thorns, wire, sharp debris, or damaged tire cords that could puncture the replacement tube.

Important Notes

• Verify compatibility with your exact Husqvarna equipment model, product number, serial number, tire size, wheel size, and production revision before ordering.
• Match part number 532008134 with your equipment's illustrated parts diagram or OEM documentation.
• Confirm the tire size printed or molded into the sidewall of your existing tire before installation.
• The 16x6.5/7.5-8 designation refers to the tube/tire sizing application, not the dimensions of the uninflated tube.
• This component is an inner tube, not a complete tire or wheel assembly.
• Do not assume the tire, rim, wheel bearings, bushings, valve hardware, axle hardware, washers, or retaining clips are included.
• This listing is for one inner tube unless otherwise specified.
• Do not select an inner tube based solely on approximate tire diameter.
• Verify the tire width, rim diameter, and valve configuration required by your application.
• Before installing the replacement tube, locate and correct the cause of the original puncture or failure.
• Carefully inspect the inside of the tire for nails, screws, thorns, wire, sharp objects, exposed cords, or other debris.
• Remove all foreign objects before installing the new tube.
• Inspect the rim for rust, corrosion, burrs, sharp edges, dents, or other damage that could puncture the tube.
• Make sure the valve-stem opening is smooth and free of sharp edges.
• Replace a tire that is severely cracked, structurally damaged, excessively worn, or has exposed internal cords.
• Avoid twisting or folding the tube during installation.
• Slightly inflating the tube before final tire installation can help it assume its natural shape and reduce the likelihood of pinching.
• Keep tire tools away from the tube during bead installation to prevent punctures.
• Make sure the valve stem remains properly aligned with the wheel opening.
• Do not pull excessively on the valve stem during installation.
• Ensure the tube is not trapped between the tire bead and rim.
• Inflate gradually while checking that the tire bead is seating evenly.
• Inflate the tire only to the pressure specified by the equipment or tire manufacturer.
• Do not exceed the tire's rated pressure.
• After installation, check for leakage and verify that the tire maintains pressure.
• Maintain appropriate tire pressure during operation, as underinflation can increase tube flexing and contribute to premature failure.
• Support the mower securely before removing a wheel. Never rely solely on a jack while servicing a wheel or tire assembly.
• Shut off the mower, engage the parking brake, remove the ignition key, disconnect the spark plug or battery where applicable, and follow manufacturer service procedures before performing wheel repairs.
• This listing is for one Husqvarna 532008134 16x6.5/7.5-8 Inner Tube only unless otherwise specified. Tire, wheel/rim, bearings, bushings, axle hardware, washers, and retainers are sold separately.
• Match part number 532008134 and the specified tire size with your equipment's illustrated parts diagram before ordering to ensure proper fitment.