Husqvarna 529475084 24-Inch S83G Chainsaw Chain – 3/8" Pitch .050" Gauge 84 Drive Links

Part Number: 529475084
Category: Chainsaw Chains, Guide Bar & Cutting Equipment
Type: X-CUT S83G 24-Inch Chainsaw Chain – 3/8" Pitch, .050" Gauge, 84 Drive Links

The Husqvarna 529475084 X-CUT S83G Chainsaw Chain is a genuine Husqvarna replacement cutting chain designed for compatible chainsaws equipped with a 24-inch guide bar, 3/8-inch pitch, .050-inch gauge, and 84-drive-link configuration. Husqvarna identifies this retail chain as the S83G, featuring a semi-chisel cutter profile and guarded drive links.

Product Specifications

• Part Number: 529475084
• Manufacturer: Husqvarna
• Series: X-CUT
• Chain Model: S83G
• Product Type: Chainsaw Chain
• Bar Length: 24"
• Metric Bar Length: 60 cm
• Pitch: 3/8"
• Gauge: .050" / 1.3 mm
• Drive Links: 84
• Cutter Profile: Semi-Chisel
• Drive Link Design: Guarded Drive Link
• Low-Kickback Design: Yes
• Factory Pre-Stretched: Yes
• Application: Chainsaw Cutting System
• Documented Compatible Models: Husqvarna 455 / 455 Rancher / 460 Rancher
• Replacement Type: Genuine Husqvarna Replacement Chain
• Condition: New
• Quantity: 1 Chainsaw Chain
• Part Number Reference: 529475084
• Alternate Number Format: 529 47 50-84
• UPC: 193028229802

Husqvarna's official specifications confirm that retail SKU 529 47 50-84 is an S83G semi-chisel chain with 3/8" pitch, .050" gauge, 24-inch/60 cm bar application, and 84 drive links.

Features & Benefits

• Genuine Husqvarna replacement chainsaw chain
• Husqvarna X-CUT S83G series
• Designed for compatible 24-inch guide bars
• 3/8-inch chain pitch
• .050-inch / 1.3 mm gauge
• 84 drive links
• Semi-chisel cutter profile
• Semi-chisel design is less sensitive to dirt
• Easier to file than more aggressive cutter profiles
• Guarded drive links help reduce kickback
• Factory pre-stretched construction
• Helps reduce the need for frequent initial tension adjustments
• Designed for lasting sharpness
• High cutting efficiency
• Smooth cutting characteristics
• Golden tie strap provides a sharpening reference point
• Oil-shaped channels help distribute lubrication through the chain
• Designed, built, and tested alongside Husqvarna chainsaws
• Suitable for homeowner and demanding ranch/property applications
• Direct replacement for compatible equipment requiring 529475084

Husqvarna describes the S83G as a robust, pre-stretched chain designed for lasting sharpness, high cutting efficiency, reduced kickback, and easier maintenance.

Documented Applications

The Husqvarna 529475084 S83G Chain is officially listed for compatible configurations of:

• Husqvarna 455
• Husqvarna 455 Rancher
• Husqvarna 460 Rancher
• Select chainsaws using a compatible 24" guide bar
• 3/8" pitch cutting systems
• .050" gauge guide bars
• 84-drive-link configurations
• General wood cutting
• Limbing
• Property maintenance
• Firewood cutting
• Ranch and landowner applications

Husqvarna's official S83G product page lists the 455, 455 Rancher, and 460 Rancher among the compatible models.

Compatibility should still be verified using all four specifications — bar length, pitch, gauge, and drive-link count — before ordering.

X-CUT S83G Semi-Chisel Design

The S83G uses a semi-chisel cutter profile. This design provides a balance between cutting performance, durability, and ease of maintenance.

Compared with more aggressive full-chisel designs, semi-chisel cutters are generally more tolerant of dirty cutting conditions and easier to sharpen. Husqvarna specifically describes the S83G semi-chisel profile as less sensitive to dirt and easy to file.

This makes the chain well suited for general-purpose applications where consistent performance and practical maintenance are important.

Factory Pre-Stretched Construction

The 529475084 S83G is factory pre-stretched to help minimize initial chain stretch during operation. This can reduce the frequency of tension adjustments compared with a chain that experiences greater initial elongation.

Proper chain tension should still be checked:

• Before each use
• After installing a new chain
• Periodically during cutting
• After the chain has warmed during operation
• Whenever excessive slack becomes visible

A new chain can still require tension adjustments during its break-in period.

Golden Tie Strap

Like other Husqvarna X-CUT chains, the S83G incorporates a golden tie strap. This provides a visual reference that helps identify where sharpening began, making it easier to determine when all cutters have been serviced during a complete sharpening cycle.

Chain Lubrication

Proper lubrication is essential for chainsaw-chain and guide-bar service life. The S83G incorporates oil-channel features designed to help transport lubricant through the cutting system, reducing friction and wear during operation.

Always make sure:

• The chainsaw contains sufficient bar-and-chain oil
• The oiling system is functioning properly
• The guide-bar oil holes are clean
• The guide-bar groove is free of packed debris
• The chain receives adequate lubrication during operation

Operating a chain without sufficient lubrication can rapidly damage the chain, guide bar, drive sprocket, and other cutting-system components.

Common Reasons for Chain Replacement

Replacement of the 529475084 S83G Chain may be appropriate when the existing chain has:

• Excessively worn cutters
• Damaged cutters
• Cracked or damaged links
• Bent drive links
• Excessive chain stretch
• Damaged tie straps
• Broken or loose rivets
• Severe heat discoloration
• Excessive corrosion
• Damage caused by striking rocks, metal, or other foreign objects
• Reached its service limit after repeated sharpening

A chain that is simply dull may be sharpened when it remains within its service specifications. Physically damaged or excessively worn chains should be replaced.

Important Fitment Information

Chainsaw chains must match the cutting system precisely. For 529475084, verify:

• 24" guide bar
• 3/8" pitch
• .050" gauge
• 84 drive links

All specifications must match the intended chainsaw and guide bar.

A 24-inch bar alone does not guarantee compatibility. Different 24-inch chains can use different pitches, gauges, and drive-link counts.

For example, Husqvarna specifically notes that this chain does not fit a 24-inch 450 Rancher configuration because that saw uses a different chain pitch.

Important Notes

• Verify compatibility with your exact chainsaw model, guide bar, sprocket, and cutting-system configuration before ordering.
• Husqvarna officially identifies 529475084 as the retail 84DL S83G chain.
• The chain specifications are 3/8" pitch, .050" gauge, and 84 drive links.
• Designed for a compatible 24-inch / 60 cm guide bar.
• Cutter profile is semi-chisel.
• The S83G incorporates a guarded drive link design.
• This listing is for one chainsaw chain only unless otherwise specified.
• The guide bar, drive sprocket, clutch drum, bar nuts, files, sharpening tools, and other chainsaw components are not included unless explicitly stated.
• Do not determine compatibility based solely on guide-bar length.
• Always match pitch, gauge, and drive-link count.
• Check markings on the existing guide bar or consult the chainsaw's documentation when determining the correct chain.
• Inspect the guide bar whenever replacing a worn chain.
• Check the bar rails for excessive wear, spreading, cracking, or other damage.
• Clean the guide-bar groove and lubrication holes before installing the replacement chain.
• Inspect the drive sprocket for excessive wear before installing a new chain.
• A heavily worn sprocket can contribute to premature wear of a replacement chain.
• Install the chain with the cutters facing the correct direction of travel along the top of the guide bar.
• Adjust chain tension according to the chainsaw manufacturer's instructions.
• Do not operate the saw with an excessively loose or excessively tight chain.
• Check chain tension frequently during the initial operating period.
• Keep the chain properly sharpened for efficient cutting.
• Husqvarna identifies 7/32" (5.5 mm) as the applicable file size for this chain.
• Maintain proper depth-gauge settings when sharpening.
• Always maintain adequate bar-and-chain lubrication.
• Never operate a chainsaw with cracked, broken, severely damaged, or improperly installed chain components.
• Shut off the chainsaw, engage the chain brake, allow the engine to cool, and disconnect the spark plug or battery as applicable before servicing the cutting system.
• Wear appropriate protective gloves when handling the chain because the cutters remain sharp even when the chain is not moving.
• This listing is for one Husqvarna 529475084 X-CUT S83G 24-Inch Chainsaw Chain – 3/8" Pitch, .050" Gauge, 84 Drive Links unless otherwise specified.
• Match part number 529475084 and all chain specifications with your chainsaw and guide-bar requirements before ordering to ensure proper fitment.