Hart 007814098 3/8" Drive 12mm Deep Well Socket – Replacement Hand Tool Socket Component

Part Number: 007814098
Category: Hand Tool Replacement Parts
Type: 3/8" Drive 12mm Deep Well Socket – Replacement Hand Tool Socket Component

The Hart 007814098 3/8" Drive 12mm Deep Well Socket is a replacement hand tool socket component designed for compatible 3/8-inch drive ratchets, extensions, and related hand tools. Featuring a 12mm fastener size and deep-well configuration, the socket provides additional reach for accessing recessed fasteners or nuts positioned on extended threaded studs. It is suitable for replacing a worn, rounded, cracked, damaged, lost, or otherwise unserviceable 12mm deep well socket when Hart part number 007814098 is specified.

Product Specifications

• Part Number: 007814098
• Brand: Hart
• Product Type: Deep Well Socket
• Drive Size: 3/8"
• Fastener Size: 12mm
• Socket Style: Deep Well
• Component Type: Replacement Hand Tool Socket Component
• Application: Hand Tools & Fastener Service
• System: Socket & Ratchet Tool System
• Function: Fastener Installation, Removal & Turning
• Condition: New

Features & Benefits

• Replacement 12mm deep well socket for compatible Hart and applicable 3/8-inch drive hand tools
• Features a 3/8-inch square drive configuration
• Designed for 12mm fasteners
• Deep-well design provides additional reach compared with a standard shallow socket
• Useful for reaching recessed nuts and fasteners positioned on extended threaded studs
• Designed to interface with compatible ratchets, extensions, breaker bars, and other appropriate 3/8-inch drive tools
• Supports routine fastener installation, removal, tightening, and loosening
• Helps replace a socket that has become worn, rounded, cracked, damaged, or lost
• Part-number-specific replacement for applications specifying Hart 007814098
• Useful for automotive, equipment, mechanical, maintenance, assembly, and general repair tasks where the specified socket configuration is appropriate

Applications

• Compatible 3/8-inch drive hand tools
• 12mm metric nuts and fasteners
• Recessed fastener access
• Fasteners installed on extended threaded studs
• Ratchet and extension assemblies
• Mechanical maintenance and repair
• Equipment assembly and service
• Automotive and general-purpose repair where appropriate
• Replacement of worn, damaged, or missing sockets
• Applications specifying Hart 007814098

Important Notes

• Verify part number 007814098 before ordering when replacing an original Hart component
• The supplied product information identifies this component as a 3/8" Drive 12mm Deep Well Socket
• Confirm that your ratchet, extension, or other driving tool uses a compatible 3/8-inch square drive
• Verify that the fastener being serviced requires a 12mm metric socket
• Do not confuse the 3/8-inch drive size with the fastener size; the socket is designed for a 3/8-inch drive tool and a 12mm fastener
• The deep-well configuration provides increased internal depth compared with a typical shallow socket, but the exact overall length and internal usable depth are not identified in the supplied product information
• The exact socket material, finish, wall thickness, point configuration, torque rating, manufacturing standard, and retention design are not identified
• Do not assume the socket is 6-point, 12-point, chrome vanadium, chrome molybdenum, impact-rated, or otherwise constructed to a particular specification unless confirmed by the applicable Hart product information
• Do not use this socket with an impact wrench, impact driver, pneumatic impact tool, or powered impact equipment unless the socket is specifically identified as impact-rated
• Using a non-impact-rated socket with an impact tool can result in socket damage, cracking, breakage, or personal injury
• Inspect the socket before each use for cracks, deformation, excessive wear, rounded engagement surfaces, corrosion, or other damage
• Do not use a cracked, severely worn, distorted, or otherwise structurally damaged socket
• Make sure the socket is fully seated on both the 3/8-inch drive tool and 12mm fastener before applying force
• Using an incorrectly sized or partially engaged socket can damage the fastener, socket, or driving tool
• Do not substitute an approximate SAE size for a 12mm fastener when proper fit is required
• Keep the socket and fastener engagement surfaces reasonably clean and free from debris that could prevent full engagement
• Use an appropriate ratchet, breaker bar, torque wrench, or extension for the specific service operation
• When a specified fastener torque is required, use an appropriate calibrated torque wrench and follow the equipment manufacturer's torque specification
• Avoid using excessive leverage beyond the capabilities of the socket, fastener, or driving tool
• Do not grind, drill, weld, heat, enlarge, reshape, or otherwise modify the socket to fit an incompatible fastener or drive tool
• This listing is for the 3/8" Drive 12mm Deep Well Socket; do not assume that a ratchet, extension, breaker bar, adapter, torque wrench, additional sockets, case, or other hand tools are included unless specifically stated
• Wear appropriate eye protection when working with hand tools and fasteners
• After use, inspect the socket for damage and store it in a clean, dry location to help maintain serviceability.