Delco DVST2.525041AAC1 Versa Series Hot Water Pressure Washer Super Streamer
Part Number: 65381
Category: Commercial Hot Water Pressure Washers
Type: Versa Series Super Steamer Hot Water Pressure Washer – 250 PSI, 2.5 GPM, 0.75 HP
The Delco DVST2.525041AAC1 Versa Series Super Steamer Hot Water Pressure Washer is a commercial hot-water cleaning system delivering 250 PSI at 2.5 GPM. Designed for applications where heated water and controlled pressure are preferred, the Super Steamer provides an effective solution for removing grease, oil, grime, and other difficult buildup.
Product Specifications
- Part Number: 65381
- Brand: Delco
- Model Number: DVST2.525041AAC1
- Series: Versa
- Product Type: Super Steamer Hot Water Pressure Washer
- Pressure Rating: 250 PSI
- Flow Rate: 2.5 GPM
- Motor Power: 0.75 HP
- Voltage: 120V
- Phase: Single Phase (1Ø)
- Amperage: 8.4A
- Pump: UDOR
- Drive Type: Belt Drive
- Cleaning Type: Hot Water / Super Steamer
- Power Source: Electric
- Application: Commercial & Professional Cleaning
- Condition: New
Features & Benefits
- Super Steamer hot-water cleaning system for professional applications
- Delivers 250 PSI at 2.5 GPM
- Heated-water cleaning helps loosen grease, oil, grime, and stubborn buildup
- Powered by a 0.75 HP electric motor
- Operates on 120V single-phase power
- Rated at 8.4 amps
- Equipped with an UDOR pump
- Belt-drive system transfers motor power to the pump
- Lower-pressure, hot-water configuration is useful where extreme pressure is unnecessary or undesirable
- Versa-series design suited for commercial cleaning and maintenance operations
Applications
The Delco DVST2.525041AAC1 Versa Super Steamer is suitable for:
- Commercial hot-water cleaning
- Grease and oil removal
- Equipment and machinery cleaning
- Shop and service-area maintenance
- Facility cleaning
- Hard-surface cleaning
- Maintenance operations
- Professional cleaning applications
- Applications benefiting from heated water at controlled pressure
Important Notes
- Verify part number 65381 and model DVST2.525041AAC1 before ordering
- Rated for 250 PSI at 2.5 GPM
- Uses a 0.75 HP electric motor
- Electrical rating is 120V, single phase, 8.4A
- Equipped with an UDOR pump and belt-drive system
- Confirm the available electrical supply meets the unit's requirements before operation
- Confirm the water supply can continuously support the 2.5 GPM flow requirement
- Use hoses, fittings, spray guns, nozzles, and accessories rated for hot-water operation
- Regularly inspect the belt-drive system for proper condition, alignment, and tension
- Hot water and heated components can cause burns; use appropriate protective equipment
- Never operate the pump without an adequate water supply
- Disconnect electrical power, relieve system pressure, and allow heated components to cool before servicing
- Verify the specific pump model, burner configuration, included accessories, electrical connection requirements, and installation needs before ordering.