Burner Motor 115/230V 60Hz 1/4 HP Capacitor Start – OEM Replacement Part
Part Number: 4095
Category: Pressure Washer Parts → Burner Components → Burner Motors
Type: Burner Motor 115/230V 60Hz 1/4 HP Capacitor Start
The Burner Motor 115/230V 60Hz 1/4 HP Capacitor Start (Part #4095) is a versatile replacement burner motor designed for hot water pressure washers, industrial burner systems, and commercial heating equipment. Featuring dual-voltage operation (115V/230V), a 1/4 HP capacitor-start design, and 3450 RPM performance, this motor provides reliable power for both the air blower and fuel pump within the burner assembly.
Key Features & Benefits
- OEM replacement burner motor
- Dual-voltage operation: 115V or 230V
- Capacitor-start design for reliable startup performance
- Powers both burner air blower and fuel pump
- Rated at 1/4 horsepower
- High-speed 3450 RPM operation
- Durable 48N frame construction
- 1/2" motor shaft
- Designed for commercial burner systems
- Helps restore reliable burner operation
Technical Specifications
Part Number: 4095
Product Type: Burner Motor
Voltage: 115V / 230V
Frequency: 60Hz
Horsepower: 1/4 HP
Motor Type: Capacitor Start
Motor Speed: 3450 RPM
Shaft Size: 1/2"
Frame Size: 48N Frame
Application: Burner Air Blower & Fuel Pump Drive
OEM Replacement: Yes
Compatible Applications
Commonly used in:
- Hot water pressure washers
- Oil-fired burner systems
- Industrial cleaning equipment
- Commercial wash systems
- Mobile pressure washing rigs
- Industrial heating equipment
- Fuel oil burner assemblies
- Fleet washing systems
- Commercial maintenance equipment
- Industrial pressure cleaning systems
Common Signs of Burner Motor Failure
A replacement burner motor may be required if you notice:
- Burner will not ignite
- Air blower not operating
- Fuel pump not turning
- Excessive motor noise or vibration
- Slow or inconsistent startup
- Motor overheating
- Capacitor-related starting problems
- Reduced burner performance
- Complete motor failure
Performance Advantages
- Provides reliable blower and fuel pump operation
- Capacitor-start design improves startup torque
- Supports efficient burner combustion
- Helps maintain consistent heat production
- Dual-voltage flexibility simplifies equipment compatibility
- Durable design for demanding commercial environments
- Restores burner system efficiency
- Helps reduce equipment downtime
- Supports dependable hot water pressure washer performance
Installation Instructions
- Disconnect electrical power before servicing the equipment.
- Allow burner components to cool completely.
- Remove the existing burner motor.
- Inspect blower wheels, couplings, and mounting hardware.
- Configure the motor for the appropriate voltage if required.
- Install the replacement motor and align components properly.
- Verify electrical connections meet equipment specifications.
- Restore power and test burner operation.
Note: Installation should be performed according to equipment manufacturer specifications and applicable electrical codes.
Maintenance Recommendations
- Inspect burner motors regularly for unusual noise or vibration.
- Check capacitor performance during routine service.
- Keep burner assemblies clean and free from debris.
- Inspect blower and fuel pump drive components for wear.
- Verify electrical connections remain secure.
- Monitor burner performance and replace worn components as needed
