Brass Sandblaster Kit 3.5 Orifice 1.2mm – OEM Replacement Part
Part Number: 2340
Category: Pressure Washer Accessories → Wet Sandblasting Equipment → Sandblaster Kits
Type: Wet Sandblasting Kit with Carbide Nozzle
The Brass Sandblaster Kit 3.5 Orifice 1.2mm is a professional-grade wet sandblasting attachment designed for use with pressure washer systems. Engineered for surface preparation, coating removal, rust removal, graffiti cleanup, and restoration work, this kit combines pressurized water and abrasive media to deliver powerful cleaning and stripping performance while minimizing airborne dust compared to traditional dry blasting methods.
Image shown for illustrative purposes only
Key Features & Benefits
- Professional-grade wet sandblasting kit
- Durable brass sandblaster assembly
- Wear-resistant carbide nozzle tip
- Designed for pressure washer-powered sandblasting
- Removes paint, rust, oxidation, and coatings
- Effective for graffiti removal and surface restoration
- Helps prepare surfaces for repainting and refinishing
- Includes 24" blasting wand
- Includes 25' polybraid abrasive pickup hose
- Reduces airborne dust compared to dry blasting methods
Technical Specifications
Product Type: Wet Sandblasting Kit
Nozzle Orifice: 3.5
Injector Size: 1.2mm
Nozzle Material: Carbide
Body Material: Brass
Maximum Flow Rate: 8 GPM
Maximum Pressure: 3650 PSI
Maximum Temperature: 190°F
Wand Length: 24 Inches
Abrasive Pickup Hose Length: 25 Feet
Application: Wet Abrasive Blasting & Surface Preparation
OEM Replacement: Yes
Kit Contents
- Brass Sandblasting Assembly
- Carbide Blasting Nozzle
- 24" Blast Wand
- 25' Polybraid Abrasive Pickup Hose
- Adjustable Sand Flow Control
Typical Applications
- Rust removal
- Paint stripping
- Surface preparation
- Graffiti removal
- Metal restoration
- Equipment refinishing
- Concrete cleaning
- Fleet maintenance
- Industrial surface cleaning
- Coating removal down to white metal
Performance Advantages
- Combines water and abrasive media for effective surface cleaning
- Removes coatings, corrosion, and contaminants efficiently
- Carbide nozzle provides extended service life
- Adjustable abrasive flow control allows application flexibility
- Reduces dust compared to traditional dry blasting methods
- Suitable for commercial and industrial restoration projects
- Helps prepare surfaces for painting and coating applications
- Compatible with a wide range of pressure washer systems
- Professional-grade cleaning and restoration performance
Installation Instructions
- Install the male pipe thread fitting into the outlet of the trigger gun.
- If using thread sealant or Teflon tape, ensure no material enters the water passage where it could obstruct the nozzle.
- Insert the abrasive pickup probe into a bag, bucket, or pile of blasting media.
- Ensure the end of the shorter breather tube remains completely uncovered by abrasive material.
- Turn the adjustment knob fully clockwise for maximum abrasive flow.
- Test with different pressure settings and abrasive grades to determine the optimal blasting performance for your application.
Maintenance Recommendations
- Flush the system with clean water after each use.
- Inspect the carbide nozzle regularly for wear.
- Check the abrasive pickup hose for damage or blockage.
- Ensure the breather tube remains unobstructed during operation.
- Replace worn nozzles promptly to maintain blasting efficiency.
- Store equipment clean and dry between uses.
- Periodically inspect all fittings and connections for leaks or wear.
