Brass Pressure Washer Swivel – 3/8" MPT x 3/8" FPT, 3000 PSI, 302°F

Part Number: 1295
Category: Pressure Washer Parts → Swivels & Fittings
Type: Brass Pressure Washer Inline Swivel – 3/8" MPT x 3/8" FPT, 3000 PSI

The Mecline Brass Pressure Washer Inline Swivel (Part #1295) is a heavy-duty high-pressure swivel engineered for professional pressure washing, industrial cleaning, spray guns, hose reels, and high-pressure hose assemblies. Featuring an inline swivel design, it provides smooth 360-degree rotation under pressure, helping eliminate hose twisting, reduce operator fatigue, and minimize stress on hoses and plumbing connections.

Key Features & Benefits

• Genuine Mecline pressure washer inline swivel
• Part Number: 1295
• Inline swivel design
• 3/8" Female NPT inlet
• 3/8" Male NPT outlet
• Smooth 360° swivel rotation
• Durable brass construction
• Rated for systems up to 3,000 PSI
• Supports flow rates up to 8 GPM
• Maximum operating temperature: 302°F
• Helps prevent hose twisting and kinking
• Reduces stress on hoses and plumbing components
• Heavy-duty commercial construction

Technical Specifications

Part Number: 1295

Manufacturer: Mecline

Product Type: Inline Pressure Washer Swivel

Inlet Connection: 3/8" Female NPT

Outlet Connection: 3/8" Male NPT

Maximum Working Pressure: 3,000 PSI

Maximum Flow Rate: 8 GPM

Maximum Temperature: 302°F

Body Material: Brass

Swivel Rotation: 360°

OEM Replacement: Yes

Compatible Applications

Suitable for use with:

• Commercial pressure washers
• Industrial pressure washing systems
• Hot and cold water pressure washers
• Pressure washer spray guns
• Spray wands and lances
• High-pressure hose assemblies
• Hose reels
• Surface cleaners
• Fleet washing equipment
• Agricultural cleaning equipment
• Industrial cleaning systems

Always verify thread size, pressure rating, flow requirements, temperature rating, and equipment compatibility before ordering.

Function of the Inline Swivel

The Mecline Inline Swivel helps:

• Provide smooth 360° rotation under pressure
• Prevent hose twisting and kinking
• Reduce stress on hoses and plumbing connections
• Improve spray gun maneuverability
• Maintain uninterrupted high-pressure water flow
• Extend the service life of hoses, spray guns, and fittings

Its inline design allows the hose to rotate freely during operation, improving handling and reducing wear on connected components.

Common Signs Replacement Is Needed

Replace the swivel if you notice:

• Water leaking around the swivel body
• Restricted or rough swivel rotation
• Excessive hose twisting
• Damaged or worn threads
• Corrosion or physical damage
• Reduced swivel performance under pressure

Replacing a worn swivel restores smooth hose movement and dependable system performance.

Installation & Service Notes

Turn off the pressure washer and relieve all system pressure before installation.

Apply an appropriate thread sealant where required and install the swivel using the 3/8" Female NPT inlet and 3/8" Male NPT outlet connections.

Tighten all fittings securely without overtightening.

Verify the swivel rotates freely and inspect all connections for leaks before placing the equipment into service.

Important: Never exceed the maximum 3,000 PSI working pressure, 8 GPM flow rate, or 302°F operating temperature. Always verify compatibility with your pressure washer system and accessories before installation.

Maintenance Recommendations

• Inspect the swivel regularly for smooth rotation and leaks.
• Check threaded connections during routine maintenance.
• Keep the swivel clean and free of dirt, debris, and mineral buildup.
• Replace worn seals or damaged components promptly.
• Inspect hoses for twisting or abnormal wear during operation.
• Use quality replacement parts to maintain reliable performance and maximize service life.