8.0 cu ft Stationary Dual-Chamber Electric Sandblast Pot – Single Outlet Sandblasting System

Part Number: 888-0632-33944PB-E

Abrasive Blast Pot / Sandblasting Machine

• Stationary

• Capacity: 8.0 CU. FT. (225 LITERS)

• Pressure Rating: 150 PSI (10.3 BAR)

• System Type: Dual-Chamber, Electric

• Overall Height (OAH): 69"

• Included Components:

  • 9" Umbrella

  • APV II W/TC Sleeve/Auto Air Valve

  • Big Gun Full Flow System

  • Union End Ball Valve

  • 2" Inlet, 1-1/2" Piping

  • 110' Twinline Assembly

  • Control Handle #2

  • 5 Year / 10 Year Warranty

• Power Requirements: 12VDC

• Control Box Compatibility: 12VDC (with appropriate wiring and power supply)

OEM Compatibility

Features & Benefits of S-Series Dual-Chamber Big-Gun Abrasive Blasters

A. 8.0 CU. FT. CAPACITY (225 LITERS)

• Upper Chamber: 3.25 CU FT (2.69 USEABLE)

• Lower Chamber: 4.19 CU FT (4.04 USEABLE)

• 150 PSI VESSEL (10.3 BAR)

• A.S.M.E. SECTION VIII DIVISION 1

• CRN FOR ALL PROVINCES

B. DUAL-CHAMBER SYSTEM

• Continuously refills while remaining pressurized

• Increases productivity by eliminating the need to stop blasting while refilling

C. BIG GUN FULL FLOW SYSTEM

• A zero pressure drop path for air & abrasive to travel to the blast nozzle

• Every 1 PSI gained or lost in abrasive blasting = 1.5% production

• A must for #7 & #8 nozzles

• Full port coupling blast hose connection for unrestricted air & abrasive flow

D. ELECTRIC CONTROLS 12VDC

• Adds additional speed to stopping & starting the blasting operation when running over 100 feet of blast hose

• Helps with freezing problems in cold weather

• Heavy-duty filtered control valve reduces stopping time when the control handle is released

E. DUAL-CHAMBER CYCLE CONTROLS

• Housed in a NEMA 4 rated enclosure

F. GALVANIZED PIPING FOR CORROSION RESISTANCE

• 1-1/2" Piping

• 2" Inlet

G. HEAVY DUTY FULL PORT BALL VALVES

H. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE

• Withstands abrasive wear for longer life

I. BOLT CLAMPS ON PUSHER LINE

• Makes field repairs easier

J. COMBINATION VALVE/APVII VALVE

• A 2-in-1 design responsible for cycling the top chamber in dual-chamber systems

• Automatic Plunger Valve II (APVII) premium abrasive metering valve with quadruple plunger seal arrangement solves air & abrasive carryover problems

K. 15' BLOWDOWN HOSE ASSEMBLY FOR REMOTE MOUNTING

L. 9" ADJUSTABLE SPIDER

• Fully adjustable for different media types & sizes

• Keeps abrasive weight off the pop-up, allowing it to close & seal properly

M. SKIRTED POP-UP GASKET

• Helps with the abrasive burping problem commonly seen with hopper feed blast pots

N. UNION END BALL VALVES

• Allows you to shut off the abrasive at the bottom of the pot for maintenance or repairs

O. FULL LOAD LIFTING EYES

• Allow lifting and transportation of vessel for placement, maintenance, or repair