8.0 cu ft Stationary Dual-Chamber Electric Blast Pot – Single Outlet with Wall-Mounted Abrasive Cut-Off for Industrial Sandblasting

Part Number: 888-5632-33944PB-E
Abrasive Blast Pot / Sandblasting Machine

• Stationary

• Capacity: 8.0 CU. FT. (225 LITERS)

• Pressure Rating: 150 PSI (10.3 BAR)

• System Type: Dual-Chamber, Electric

• Overall Height (OAH): 69"

Included Components:

• 9" Umbrella

• APV II W/TC Sleeve/Auto Air Valve

• Big Gun Full Flow System

• Union End Ball Valve

• 2" Inlet, 1-1/2" Piping

• 110' Control Cord & Control Handle #2

• 5-Year / 10-Year Warranty

Power Requirements:

• 12VDC

• Control Box Compatibility: 12VDC (with appropriate wiring and power supply)

OEM Compatibility

Features & Benefits of S-Series Dual-Chamber Big-Gun Abrasive Blasters

• 8.0 CU. FT. Capacity (225 LITERS)

  • Upper Chamber: 3.25 CU FT (2.69 USEABLE)

  • Lower Chamber: 4.19 CU FT (4.04 USEABLE)

  • 150 PSI Vessel (10.3 BAR)

  • A.S.M.E. Section VIII Division 1

  • CRN for All Provinces

• Dual-Chamber System

  • Continuously refills while remaining pressurized

  • Increases productivity by eliminating the need to stop blasting while refilling

• Big Gun Full Flow System

  • Zero pressure drop path for air & abrasive to travel to the blast nozzle

  • Every 1 PSI gained or lost in abrasive blasting = 1.5% production

  • Full port coupling blast hose connection for unrestricted air & abrasive flow

• Electric Controls 12VDC

  • Adds additional speed to stopping & starting the blasting operation when running over 100 feet of blast hose

  • Helps with freezing problems in cold weather

  • Heavy-duty filtered control valve reduces stopping time when the control handle is released

• Dual-Chamber Cycle Controls

  • Housed in a NEMA 4 rated enclosure

• Galvanized Piping for Corrosion Resistance

  • 1-1/2" Piping

  • 2" Inlet

• Heavy Duty Full Port Ball Valves

• Extended Life Schedule 80 Heavy Duty Nipple

  • Withstands abrasive wear for longer life

• Bolt Clamps on Pusher Line

  • Make field repairs easier

• Combination Valve/APVII Valve

  • 2-in-1 design responsible for cycling the top chamber in dual-chamber systems

  • Automatic Plunger Valve II (APVII) premium abrasive metering valve with quadruple plunger seal arrangement solves air & abrasive carryover problems

  • Solid machined tungsten carbide plunger & sleeve provides superior wear rates and 100% consistent tolerances

  • 1" NPT cleanout port gives access to obstructions that may be bridging over the metering port

• 15' Blowdown Hose Assembly for Remote Mounting

• 9" Adjustable Spider

  • Fully adjustable for different media types & sizes

  • Keeps abrasive weight off the pop-up, allowing it to close & seal properly

• Skirted Pop-Up Gasket

  • Helps with the abrasive burping problem commonly seen with hopper feed blast pots

  • A must when using large grit sizes

• Union End Ball Valves

  • Allows you to shut off the abrasive at the bottom of the pot for maintenance/repairs and remove the abrasive metering valve without dumping the entire vessel of abrasive on the floor

• Full Load Lifting Eyes

  • Allow lifting and transportation of vessel for placement, maintenance, or repair

This 8.0 cu ft Dual-Chamber Electric Blast Pot is engineered for high-efficiency industrial sandblasting. It features advanced dual-chamber technology, allowing continuous refilling without interrupting the blasting operation, making it ideal for heavy-duty surface preparation, coating removal, and abrasive blasting in industries such as construction, marine, and automotive manufacturing.