10.0 cu ft Stationary Electric Blast Pot – Single-Outlet Pressure Release System with MPV/Combination Valve, 1-1/2" Piping & Big Gun Moisture Separator

Part Number: 888-0732-12914PB-E
Weight: 607 lbs
Category: Abrasive Blast Pot / Sandblasting Machine

Configuration: Stationary
Capacity: 10.0 CU. FT. (285 Liters)
Pressure Rating: 150 PSI (10.3 BAR)
System Type: Electric / Pressure Release
Overall Height (OAH): 66″

Included Components

• 9″ Umbrella

• MPV / Combination Valve

• Big Gun Full Flow System

• Big Gun 350 CFM Moisture Separator

• Union End Ball Valve

• 1-1/2″ Galvanized Piping (Heavy-Duty)

• 110′ Control Cord & Control Handle #2

• **5-Year / 10-Year Warranty ***

Note: When using steel abrasives, Electric Control Handle #2 (888-2263-401PB) and sealed connector(s) (PB-31131) are required.

Features & Benefits of SPR Electric Stationary Big Gun Full Flow Systems

10.0 CU. FT. Capacity (285 Liters)

• 150 PSI vessel (10.3 BAR)

• A.S.M.E. Section VIII Division 1 certified

• CRN registered for all provinces

Pressure Release System

• Automatically blows down the vessel when the control handle is released

• Low-maintenance design for long-term reliability

• Simplified troubleshooting and field service

Electric Controls (12 VDC)

• Improves start / stop response when running over 100 ft of blast hose

• Prevents freezing issues in cold weather applications

• Heavy-duty filtered control valve reduces stopping time after trigger release

Big Gun Full Flow System

• Zero-pressure-drop air / abrasive path to the nozzle

• Every 1 PSI gain or loss equals ≈ 1.5 % change in production rate

• Ideal for #7 and #8 nozzles

• Full-port couplings ensure unrestricted flow

Big Gun 350 CFM Heavy-Duty Moisture Separator

• Removes moisture to maintain dry media flow

• Prevents clogging and improves abrasive efficiency

1-1/2″ Galvanized Piping for Corrosion Resistance

• Long-life durability in abrasive and humid environments

Heavy-Duty Full-Port Ball Valves

• Provide smooth operation and maximize air volume

Extended Life Schedule 80 Heavy-Duty Nipples

• Resist abrasive wear and extend service intervals

Bolt Clamps on Pusher Line

• Simplify maintenance and allow quick field repairs

Combination Valve / Manual Plunger Valve (MPV)

• 2-in-1 design stops airflow and relieves vessel pressure upon trigger release

• Manual Plunger Valve offers wide adjustment range for abrasive flow

• Tungsten carbide components deliver superior wear resistance

• 1″ NPT clean-out port for clearing obstructions and vessel draining

15′ Blowdown Hose Assembly for Remote Mounting

9″ Adjustable Spider

• Adjustable for various media sizes and densities

• Prevents abrasive weight from interfering with the pop-up seal

Skirted Pop-Up Gasket

• Knifes through abrasive for secure sealing

• Reduces “burping” issues in hopper-feed systems

• Ideal for large-grit abrasives

Union End Ball Valves

• Allow abrasive shut-off without emptying the vessel

Full-Load Lifting Eyes

• Enable safe lifting and transport for placement and maintenance

Suggested Applications

This 10.0 cu ft Stationary Electric Blast Pot is designed for high-output industrial sandblasting where precision control and power efficiency are essential.

Best for:

• Shipyards and Marine Surface Preparation

• Bridge and Infrastructure Restoration

• Pipeline and Storage Tank Maintenance

• Steel Fabrication Shops

• Heavy Equipment Refurbishing

• Concrete Surface Treatment

Engineered for continuous-duty operation, this system provides exceptional media flow, fast response times, and long-term durability in demanding industrial environments.