Husqvarna 582270107 Pump Pinion Assembly – Replacement Lawn & Garden Equipment Pump Drive Component

Part Number: 582270107
Category: Lawn & Garden Equipment Replacement Parts
Type: Pump Pinion Assembly – Replacement Lawn & Garden Equipment Pump Drive Component

The Husqvarna 582270107 Pump Pinion Assembly is a replacement pump drive component designed for compatible Husqvarna lawn and garden equipment. Installed within the applicable pump or drive assembly, the pinion helps transfer rotational movement and mechanical power between interacting drive components. Ideal for replacing a worn, stripped, chipped, broken, damaged, or otherwise unserviceable pump pinion assembly, the 582270107 helps restore proper gear engagement and operation of the designated pump drive system.

Product Specifications

• Part Number: 582270107
• Brand: Husqvarna
• Product Type: Pump Pinion Assembly
• Component Type: Replacement Pump Drive Component
• Application: Lawn & Garden Equipment
• System: Pump, Gear & Drive System
• Function: Rotational Power Transfer, Gear Engagement & Pump Drive Operation
• Condition: New

Features & Benefits

• Replacement pump pinion assembly for compatible Husqvarna equipment
• Designed for installation within the applicable pump drive system
• Helps transfer rotational movement between interacting drive components
• Supports proper mechanical engagement within the pump assembly
• Helps maintain coordinated operation of applicable pump and drive components
• Provides an assembly-level replacement for applicable pump drive repairs
• Suitable for replacing a worn, stripped, chipped, cracked, broken, seized, or damaged pinion assembly
• Helps restore drive-system operation when the original pinion is no longer serviceable
• Useful for equipment maintenance, pump repair, and drive-system restoration
• Direct replacement option when Husqvarna part number 582270107 is specified

Applications

• Husqvarna lawn and garden equipment
• Compatible Husqvarna outdoor power equipment
• Pump drive assemblies
• Gear-driven pump systems
• Mechanical power transmission systems
• Pinion and gear assemblies
• Pump maintenance and repair
• Drive-system service applications
• Replacement of worn or damaged pump pinion components
• Applications specifying Husqvarna 582270107

Important Notes

• Verify part number 582270107 before ordering
• Confirm compatibility with your specific Husqvarna equipment model, pump, and drive-system configuration
• The supplied product information identifies this component as a Pump Pinion Assembly, but the exact type and function of the pump being driven are not identified
• Do not assume this component is specifically associated with a hydraulic, hydrostatic, oil, fuel, water, lubrication, or other type of pump unless confirmed by the applicable Husqvarna parts information
• The exact pinion diameter, number of teeth, tooth pitch, pressure angle, bore diameter, shaft interface, hub dimensions, gear ratio, material, finish, rotation direction, and compatible pump models are not identified in the supplied product information
• Because this component is identified as an assembly, confirm the exact package contents if additional components are required for your repair
• Do not assume that shafts, bearings, bushings, keys, gears, seals, spacers, washers, retainers, clips, or mounting hardware are included unless specifically stated
• Compare the original pinion assembly's overall dimensions, tooth count and profile, bore or shaft interface, hub configuration, mounting method, orientation, and mating components
• Pinion gears that appear visually similar may have different tooth counts, pitches, diameters, bores, offsets, or engagement characteristics
• Do not force a mismatched pinion into an incompatible gear or pump assembly
• Inspect associated mating gears, pump shafts, drive shafts, bearings, bushings, keys, splines, hubs, seals, spacers, retainers, and housings for wear or damage
• If the original pinion has stripped, chipped, or broken teeth, inspect the complete drive system for binding, misalignment, seized components, excessive loading, inadequate lubrication, or damaged mating gears
• Replacing only the pump pinion assembly may not correct the problem if another worn or damaged component caused the original failure
• Clean the gear and pump assembly of broken gear material, metallic debris, dirt, old lubricant, or other contamination as appropriate before installing the replacement
• Use only the lubricant or fluid specified for the applicable pump and gear assembly; do not assume a particular grease or oil is appropriate
• Do not file, grind, drill, weld, heat, reshape, or otherwise modify the pinion teeth, bore, shaft interface, or assembly to force compatibility
• Shut off the equipment, disconnect the spark plug, battery, or other power source as appropriate, and relieve any applicable mechanical, hydraulic, or stored system pressure before service
• After installation, verify proper pinion fitment, gear alignment, tooth engagement, shaft positioning, free movement, lubrication where applicable, component clearance, and overall pump drive operation before returning the equipment to normal service